Entering With The Touch Panel; About The Entry Screen; Entering Characters - Oki MB492dn User Manual

Entering with the Touch Panel

About the entry screen

Entering Characters

Switching the Entry Mode (Numbers Alphabetic Characters)
Switching the Entry Mode (Uppercase Lowercase)
Deleting an Entered Character
When you need to enter characters while you are setting an item, the following entry screen is displayed.
You can enter uppercase and lowercase alphabets, numbers, and symbols.
Memo
When you need to enter only numbers, the on-screen keyboard may not be displayed. In such a case, use the 10-key pad to enter
numbers.
About the entry screen
The number of buttons in the entry screen differs depending on the input.
The figure below shows the screen with the largest number of buttons as an example.
Item
1 text entry field
2 The number of entered characters/the maximum number of
characters that can be entered
3 Back Space
4 Character panel
5 Return button
6 Left button/right button/up button/down button
7 Capital Lock
8 Entry mode button
Entering Characters
1.
Press the touch panel.
2.
When the entry is complete, press [OK] or [Next].
Memo
To enter a diacritical mark, press and hold a character button with [...] shown. When a diacritical mark appears, press the character
you want to enter.
The screen below shows an image when holding down the "a" button.
Description
Displays the entered characters.
Indicates the maximum number of characters that can be entered
and the number of entered characters.
Deletes a character just before the cursor.
Enters characters.
The character type switches depending on the entry mode.
Puts a line break. This button appears when entering body text of an
E-mail.
Moves the cursor left, right, up, or down.
Switches between the uppercase and lowercase characters.
Switches the entry mode (types of characters) for entering text.
484