Using The Wia Driver (Windows Only); Using Windows Fax And Scan - Oki MB492dn User Manual

Using the WIA Driver (Windows Only)

Scanning

Using Windows Fax and Scan

The WIA driver does not support the network scan function. Connect the machine to a computer via a USB interface or WSD Scan.
The WIA driver does not support Mac OS X.
The WIA 2.0 driver supports Windows 8.1/Windows Sever 2012 R2/Windows 8/Windows Server 2012/Windows 7/Windows Server 2008
R2.
The WIA 1.0 driver supports Windows Vista/Windows Server 2008/Windows Server 2003.
Scanning
Memo
The following procedure uses PaperPort as an example.
1.
Set a document in the ADF or on the document glass.
2.
Start PaperPort on the computer.
3.
Select [Select], and then select [WIA: MB5(4)x2/ES5(4)1x2].
4.
Click [Scan].
5.
Select a paper feed method.
6.
Select an image type.
7.
Specify the area to scan.
8.
Click [Scan].
9.
To complete scanning, click [Cancel].
10.
If you do not scan other pages or the back side, click [Quit].
The scanned image is displayed in PaperPort.
Using Windows Fax and Scan
"Windows FAX and Scan" is a function available with Windows 8/Windows 7/Windows Vista.
1.
Set a document in the ADF or on the document glass.
2.
Click [Start] on a computer, and then select [All Programs] > [Windows FAX and Scan]. (For
Windows 8, right-click on the [Start] screen, and then select [All Programs] > [Windows FAX and
Scan].)
3.
Click [New Scan].
4.
Select [MB5(4)x2/ES5(4)1x2], and then click [OK].
5.
Set the setting if necessary.
179