Adjusting Rgb (Rgb) - Oki MB492dn User Manual

Adjusting RGB (RGB)

This section describes how to change the default setting of RGB when scanning.
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Press [OK].
5.
Press [Scanner Setup].
6.
Press [Default Settings].
7.
Press [Image Settings].
8.
Press [RGB].
9.
Select a value for each color.
10.
Press [Back] until the home screen is displayed.
805