Using Direct Entry - Oki MB492dn User Manual

Using Direct Entry

Enter an e-mail address directly on the operator panel.
Memo
Set an e-mail address in the following steps.
A destination of scanned data: Step 6 in
A reply destination of a received e-mail: Step 9 in
1.
Press [Manual Input] on the [Scan To E-mail] or [Basic] tab.
An e-mail address can be entered by pressing [Destination (To)].
2.
Enter an e-mail address.
You can enter up to 80 characters.
3.
Press [OK].
"Using Scan to E-mail"
"Specifying a Sender and Reply
71
Destination"