Copying Different Size Documents (Mixed Size) - Oki MB492dn User Manual

Copying Different Size Documents (Mixed Size)

You can set multiple documents having the same width but different lengths in the ADF so that they can be copied on their respective
paper sizes.
Note
You can use this mixed-size function only if the document is a combination of Letter and Legal 14, Letter and Legal 13.5, or Letter
and Legal 13.
If [Mixed Size] is enabled, [Paper Feed] cannot be selected. The paper tray that matches the document is automatically selected to
feed the paper.
[Mixed Size] is available only if [Zoom] is set to [98% Fit to page] or [100%].
You cannot set [Edge Erase] and [Mixed Size] at the same time.
To use multiple sheets of paper, press [Device Settings], and then select [Paper Setup] > [Select Tray] > [Copy] to enable the MP
tray.
When you use the MP tray, load paper in the MP tray, and then display the [Mixed Size] menu.
Memo
This section covers an example of Legal 14 loaded in Tray 1 and Letter loaded in the MP tray.
1.
Load Legal 14 paper in Tray 1, and then load Letter paper in the MP tray.
Memo
You can use only standard paper for this function.
2.
Press [Device Settings].
3.
Press [Paper Setup].
4.
Press [Tray 1] and [Paper Size] in order, and then select [Legal 14].
5.
Press [Back] until [MP tray] is displayed.
6.
Press [MP tray] and [Paper Size] in order, and then select [Letter].
7.
Press [Back] until the home screen is displayed.
8.
Press [Copy] or the
The touch panel display switches to the copy top screen.
(COPY) button.
52