Oki MB492dn User Manual page 534

Opening the Web Page of This Machine from a Computer
Setting Auto Power Off
Setting the Transition Time
You can set Auto Power Off from the Web page of this machine.
Setting Auto Power Off
1.
Open the Web page of this machine.
About the IP Address of this machine
Setting an IP Address from the Operator Panel on This Machine
How to log in to the Web page
About the Web Page of This Machine
2.
Log in as the administrator.
How to log in as the administrator
About the Web Page of This Machine
3.
Click [Admin Setup].
4.
Click [User Install] > [Power Setup].
5.
Select [Auto Power Off], and then click [Submit].
Available value settings:
Enable, Auto Config*,
* indicates the factory default setting.
Setting the Transition Time
1.
Open the Web page of this machine.
About the IP Address of this machine
Setting an IP Address from the Operator Panel on This Machine
2.
Log in as the administrator.
How to log in as the administrator
About the Web Page of This Machine
3.
Click [Admin Setup].
4.
Click [Management] > [Power Save].
5.
Select [Auto Power Off Time], and then click [Submit].
Available value settings:
1 hour, 2 hours,
* indicates the factory default setting.
Disable
3 hours, 4 hours*, 8 hours, 12 hours, 18 hours, 24 hours
533