Specifying A File Name (File Name) - Oki MB492dn User Manual

Specifying a File Name (File Name)

You can specify a name of a scanned data file.
1.
Press [Fax/Internet Fax] or the
The touch panel display switches to the fax/Internet fax top screen.
Memo
To display the home screen, press the
2.
Set a document in the ADF or on the document glass.
3.
Press [Internet Fax].
4.
Press [File Name] on the [Advanced] tab.
5.
Enter a file name, and then press [OK].
You can enter up to 64 characters.
Entering Characters
Memo
If you do not specify a file name, the factory default setting name is used.
6.
Specify a destination.
Specify a destination in one of the following ways.
Using Direct Entry
Selecting from the Address Book or Group List
Using a One-touch Button
Selecting from the Transmission History
Specify a Destination by Searching the LDAP Server
7.
Change other settings if necessary, and then press the
Transmission starts.
Topics
You can change other settings for fax transmissions.
Setting Scanning for Transmission
Sending an Internet Fax
(FAX) button.
(HOME) button.
440
(START) button.