Oki MB492dn User Manual page 703

ECM Mode "ON"
PreFix "NULL"
Received Time Stamp "OFF"
Print Check Message "ON"
Fax Setting
Service Bit "OFF"
Country Code "International or U.S.A"
A/R Full Print "ON"
Tone For Echo (For Transmission) "Disable"
Tone For Echo (For Reception) "Disable"
H/Modem Rate (For Tx) "33.6 Kbps"
H/Modem Rate (For Rx) "33.6 Kbps"
Attenuator "10 db, Range: 0 - 15 db"
MF Attenuator "8 db, Range: 0 - 15 db"
Pulse Make Ratio "40%, Range: 33, 39, 40%"
Pulse Dial Type "N, Range: N, 10-N, N+1"
MF (Tone) Duration "100 mseconds, Range: 75, 85, 100 mseconds"
Calling Timer "60 mseconds, Range: 1 - 255 seconds"
PBX Line "OFF"
Forwarding Setting
TAD Mode "Type 3"
Tel Priority Mode "OFF"
CNG Detection "OFF"
T/F Timer Programming "35 seconds"
Soft Ringer Volume "Middle"
Remote Receive Number "OFF"
Memo
" " indicates the factory default setting.
Forwarding Setting "OFF"
Forwarding Number "NULL"
702