Fax Setup; Faxserver Function; Scanner Setup; Copy Setup - Oki MB492dn User Manual

IEEE802.1X
Secure Protocol Server
LDAP
Security Protocol
ON/OFF
IP Filtering
MAC Address
Filtering
SSL/TLS
IPSec
Change
Network
Password
Maintenance Reset/Restore Restarts and resets a network. Even if you access the Web page from the Web browser after
Network Scale Improves operation efficiency on a network. This setting is very effective when a hub that has the

Copy Setup

You can set the image quality, density, scan size, margins, edge erase, duplex, and other settings.

Fax Setup

Item
Default Settings
Security Function
Other Settings

FaxServer Function

Item
Environmental Settings
Default Settings
Security Function

Internet Fax Setup

Sets Internet Fax.

Scanner Setup

Item
Default Settings
E-mail Setup
USB Memory Setup
Sets EEE802.1X/EAP information.
IEEE802.1X
Connecting This Machine to the Authentication Network by Using IEEE802.1X
Sets secure protocol server information.
Secure Protocol Server Settings (Kerberos)
Sets LDAP information.
LDAP Server Settings
Stops a network protocol and network service that are not used.
Restricts access by using IP addresses. Access from outside your company is also supported. However,
this function requires sufficient knowledge about IP addresses. Some settings may result in serious
problems that prevent you from accessing the machine via a network.
Limiting by Using an IP Address (IP Filtering)
Restricts access by using MAC addresses. Access from outside your company is also supported.
However, this function requires sufficient knowledge about MAC addresses. Some settings may result
in serious problems that prevent you from accessing the machine via a network.
About the Web Page of This Machine
Limiting by Using a MAC Address (MAC Address Filtering)
Encrypts communications between a computer (client) and the machine.
Encrypting Communication with SSL/TLS
Sets the encryption for communications between a computer (client) and the machine, and settings to
prevent tampering.
Encrypting Communication with IPSec
Changes the administrator password. The default value of the password is the last six digits of the
MAC address.
Changing the Administrator Password
restarting, the Web page is not displayed until the restart is complete. Resetting restores the IP
address to its default status, resulting in information you manually set being lost. In such a case, the
Web page cannot be displayed.
spanning tree function is used, or a computer and the machine are connected one-on-one with a
cross cable.
Description
Sets the image quality, density, and other default settings for sending faxes.
Sets security for sending faxes.
Sets other settings for sending faxes.
Description
Sets the image quality, density, and other default settings for scanning.
Sets e-mail settings that are required for performing Scan to E-mail.
Sets USB Memory settings for performing Scan to USB Memory.
Description
Sets the environmental settings.
Sets the default settings.
Sets the security settings.
494