Snmp Trap - Oki MB492dn User Manual

SNMP Trap

Item
Web page Configuration
Tool
(Windows)
Network
Setting Plug-
in
Printer Trap -
Community
Name
Address 1-5 -
Trap Enable 1- -
5
Printer Reboot -
1-5
Receive Illegal -
Trap 1-5
Online 1-5 -
Offline 1-5 -
Paper Out 1-5 -
Paper Jam 1-5 -
Cover Open 1- -
5
Printer Error -
1-5
Factory Description
default
Network
setting
Card Setup
(Mac OS X)
- public Sets the community name for a printer trap within 31 characters.
- 0.0.0.0 Specifies a trap destination in TCP/IP. You can specify up to 5 destinations.
- Disable Specifies whether to use a printer trap in TCP #1-5.
- Disable Specifies whether to send an SNMP message when the machine has
rebooted.
- Disable Specifies whether to use a trap when a community name other than the
one set in [Printer Trap Community Name Set] is used to access the
machine.
- Disable Specifies whether to send an SNMP message every time the machine
comes online.
- Disable Specifies whether to send an SNMP message every time the machine
comes offline.
- Disable Specifies whether to send an SNMP message if the machine runs out of
paper.
- Disable Specifies whether to send an SNMP message if paper jams.
- Disable Specifies whether to send an SNMP message every time the machine's
cover opens.
- Disable Specifies whether to send an SNMP message if an error occurs.
769