Block Junk Fax; Registering (If Selecting [Off] Or [Mode1]) - Oki MB492dn User Manual

Block Junk Fax

Registering (If Selecting [OFF] or [Mode1])

Registering (If Selecting [Mode2] or [Mode3])
Deleting a Registered Number
You can block unwanted faxes by setting to receive faxes only from registered speed dial numbers, or rejecting reception from specific
registered numbers.
There are three ways to block unwanted junk faxes.
Mode Description
Mode 1
Mode 2
Mode 3
OFF
: Incoming numbers
: Numbers that are registered in the speed dial numbers
: Numbers that are registered to block junk faxes
White shapes indicate that reception is allowed, and gray shapes indicate that reception is rejected.
Registering (If Selecting [OFF] or [Mode1])
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
Entering Characters
4.
Press [OK].
5.
Press [Fax Setup].
6.
Press [Other Settings].
7.
Press [Block Junk Fax List].
8.
Press [Settings].
9.
Select [OFF] or [Mode1].
Registering (If Selecting [Mode2] or [Mode3])
This mode rejects the senders who are not registered in the speed dial numbers.
If the last four digits of a registered fax number match the sender ID, reception is allowed.
This mode rejects the senders with the numbers that are registered to block junk faxes.
Register four to eight digits of a fax number.
You can enter up to 10 numbers.
This mode is a combination of Mode 1 and Mode 2.
This mode rejects the senders who are not registered in the speed dial numbers.
This mode also rejects the senders who are registered to block junk faxes.
Junk faxes are not blocked.
392