Setting To Use Wsd Scan - Oki MB492dn User Manual

Setting to Use WSD Scan

To use the Scan to PC (WSD Scan) function and the Remote Scan (WSD Scan) function via the WSD Scan connection, follow the
procedure below.
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
4.
Press [OK].
5.
Press [Scanner Setup].
6.
Press [WSD Scan Setup].
7.
Check that [WSD Scan] is set to [Enable].
Memo
Pressing [WSD Scan] switches between [Enable] and [Disable].
8.
Press [Back] until the home screen is displayed.
119