Registering Forms (Form Overlay); Creating A Form; Registering The Form To The Machine Using Configuration Tool - Oki MB492dn User Manual

Registering Forms (Form Overlay)

Creating a Form

Registering the Form to the Machine Using Configuration Tool

You can register such as logos to the machine as forms, and then print overlays. This section describes how to register forms.
About how to Print Overlays
Overlaying Forms or Logos (Overlay)
Note
The Windows XPS printer driver cannot be used.
Creating a Form
1.
Click [Start], and then select [Devices and Printers].
2.
Right-click the printer icon, and then select the necessary printer driver from [Printer Properties].
3.
Select the [Ports] tab, select the [FILE] check box from [Port], and then click [Configure Port].
4.
Create a form to register on the machine.
If using the Windows PCL printer driver, proceed to step 9.
5.
Select [Print] from the [File] menu.
6.
Click [Preferences] (or [Properties]).
7.
Select the [Extend] tab, and then click [Overlays].
8.
Select [Create Form].
9.
Start printing.
10.
Enter the file name under which you want to save.
11.
Return [Printer Port] from the [Ports] tab.
Registering the Form to the Machine Using Configuration Tool
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select [Storage Manager] from the [Plug-ins] menu.
3.
Click (New Project).
4.
Click (Add File to Project), and then select a created form file.
The form is added to the project.
5.
Click the form file.
6.
Enter [ID], and then click [OK].
Note
Do not change [Target Volume] and [Path].
7.
Select the machine from the bottom of the Storage Manager Plug-in window.
8.
Click (Send project file to printer).
751