Registering An E-Mail Address - Oki MB492dn User Manual

Registering an E-mail Address

If you use the User Setting plug-in of Configuration Tool, you can register and edit a destination e-mail address.
You can register up to 300 e-mail addresses in the address book.
If you click (Save to device), the changed settings are reflected to the machine.
Note
To use the E-mail Address Manager, install the User Setting plug-in. You can install the User Setting plug-in at the same time as
when installing Configuration Tool or install the plug-in later.
Installing Configuration Tool
You must register the machine in Configuration Tool in advance.
Registering and Removing This Machine
About Configuration Tool
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select the machine from [Registered Device Table].
3.
Select the [User Setting] tab.
4.
Click [E-mail Address Manager].
5.
Enter the administrator password, and then click [OK].
958