Changing Settings Before Copying - Oki MB492dn User Manual

Changing Settings before Copying

This chapter describes how to copy using various settings such as N-in-1 and Duplex Copy settings.
Memo
Changes you make on the copy start screen are applied temporarily. To change default settings, press [Device Settings], and then
select [Admin Setup].
Copy Setup
Changing the Number of Copies
Copying on Both Sides of Paper (Duplex Copy)
Combining Multiple Pages on One Sheet of Paper (N-in-1)
Specifying the Paper Feed Tray (Paper Feed)
Making Enlarged or Reduced Copies (Zoom)
Changing the Scan Size (Scan Size)
Sorting Each Set in Page Order (Sort)
Adjusting the Density (Density)
Selecting the Document Type (Document Type)
Specifying the Scan Resolution (Resolution)
Copying a Document with a Colored Background Clearly (Background Removal)
Adjusting the Contrast (Contrast)
Changing the Document Orientation (Direction)
Making Multiple Copies on a Sheet of Paper (Repeat)
Copying Both Sides of a Card to One Side (ID Card Copy)
Enabling Continuous Scan Mode (Continuous Scan)
Copying Different Size Documents (Mixed Size)
Setting Margins (Margin)
Erasing Edge Shadows (Edge Erase)
21