Setting The Alert Info Plug-In; Basic Settings; Device Settings - Oki MB492dn User Manual

Setting the Alert Info Plug-in

Basic Settings

Device Settings

Filter Settings
Checking Logs
You can use the Alert Info plug-in to display a message on your computer when a job is complete. As a special term for this software,
completion of a job is called an "event".
Note
The Alert Info plug-in can be used with devices connected to the network.
The time and time zone of this machine must be consistent with those of your computer.
Basic Settings
You can set basic settings of the Alert Info plug-in.
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select [Alert Info] from the [Plug-ins] menu.
3.
Select [Basic settings].
4.
Change the setting if necessary.
5.
Click [Update].
Device Settings
The Alert Info plug-in settings can be changed for each device.
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select [Alert Info] from the [Plug-ins] menu.
3.
Select [Setting devices].
4.
Click [Update device].
744