Importing And Exporting Destination E-Mail Addresses; Exporting Addresses To A File; Importing Addresses From A File - Oki MB492dn User Manual

Importing and Exporting Destination E-mail Addresses

Exporting Addresses to a File

Importing Addresses from a File

With the User Setting plug-in, you can register and edit the e-mail address of the machine. The following section describes some
functions.
Note
To use the following functions, install the User Setting plug-in.
About how to install the plug-in
Installing Configuration Tool
Exporting Addresses to a File
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select the machine that has the addresses you want to export from [Registered Device Table].
3.
Select the [User Setting] tab.
4.
Click [E-mail Address Manager].
5.
Enter the administrator password, and then click [OK].
The factory default password is "aaaaaa".
6.
Click (Export to file).
7.
Enter the name of a file to be saved and the name of the save destination folder, and then click [Save].
Note
After exporting, the edited CSV file may not restore properly.
Importing Addresses from a File
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select the machine to which you want to import the addresses from [Registered Device Table].
3.
Select the [User Setting] tab.
4.
Click [E-mail Address Manager].
5.
Enter the administrator password, and then click [OK].
The factory default password is "aaaaaa".
6.
Click (Import from file).
7.
Click [Open] from [Select CSV File].
8.
Select the file to import, and then click [Open].
9.
Click [Next].
10.
Select the settings to import, and then click [Import].
11.
Click (Save to device).
Memo
734