Editing the Sender Name (Originator)
Registering the Originator Name
Changing the Standard Originator Name
You can change the sender name (originator) that is printed on a sent fax. To change the name, you must register the originator name
in advance.
Before using the following function, check that the [TTI] setting is enabled.
Disclosing a Sender Name (Originator) to the Recipient
Note
Only use alphanumeric characters for [Sender ID].
Memo
If you set [Sender ID], the name is automatically registered to [TTI 1].
Registering the Fax Numbers and Sender Name
Registering the Originator Name
You can register up to three sender names (originators).
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
Entering Characters
4.
Press [OK].
5.
Press [User Install].
6.
Press [TTI Register/Edit].
7.
Press an originator number to register.
8.
Enter a name.
You can enter up to 22 characters.
9.
Press [OK].
10.
Press [Back] until the home screen is displayed.
Changing the Standard Originator Name
If you have the sender (originator) name that is frequently used, it is recommended to specify the name as the standard originator
name.
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
Entering Characters
4.
Press [OK].
5.
Press [User Install].
371