Using Configuration Tool (Windows Only) - Oki MB492dn User Manual

Using Configuration Tool (Windows Only)

You can set Power Save mode from Configuration Tool.
Set the length of idle time before entering Power Save mode.
For details on Configuration Tool, refer to
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select the machine from [Registered Device Table].
3.
Click the [Device Setting] tab.
4.
Click [Menu settings].
5.
Click (Display administrator settings).
6.
Enter the administrator password, and then click [OK].
The factory default password is "aaaaaa".
Entering Characters
7.
Click in order of [Admin Setup] > [Management] > [Power Save].
8.
Select the transition time from [Power Save Time], and then click
Available transition time settings
1 minute*, 2 minutes,
* indicates the factory default setting.
"Using Configuration Tool (Windows
3 minutes, 4 minutes, 5 minutes,
only)".
10 minutes, 15 minutes,
523
(Save to device).
30 minutes, 60 minutes