Registering A Destination (Profile) From Configuration Tool - Oki MB492dn User Manual

Registering a Destination (Profile) from Configuration Tool

This section describes the registration method that uses the Configuration Tool on a computer.
If you click (Save to device), the changed settings are reflected to this machine.
Note
To use the E-mail Address Manager, install the User Setting plug-in. You can install the User Setting plug-in at the same time as
when installing Configuration Tool or install the plug-in later.
Installing Configuration Tool
You must register the machine in Configuration Tool in advance.
Registering and Removing This Machine
About Configuration Tool
1.
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select the machine from [Registered Device Table].
3.
Select the [User Setting] tab.
4.
Click [Profile Manager].
5.
Enter the administrator password, and then click [OK].
The factory default password is "aaaaaa".
1014