Connecting To The Public Line (If Connecting A Telephone To The Machine) - Oki MB492dn User Manual

Connecting to the Public Line (If Connecting a Telephone to the Machine)

No. Name
1 Telephone cable
2 LINE connector
3 Public line (analog)
4 Telephone connector cover
5 TEL connector
1.
Plug one end of the included telephone cable (1) into the LINE connector (2) of the machine and the
other end into a public line (analog) (3).
2.
Remove the telephone connector cover (4).
3.
Plug the external telephone cable into the TEL connector (5) of the machine.
A telephone that is connected to the machine is called an external telephone.
Note
Only one telephone can be connected to the machine.
Do not connect the telephone to the machine. If you connect the telephone to the machine in parallel, the following
problems occur, resulting in the machine not functioning correctly.
If you pick up the handset of the telephone that is connected in parallel while the machine is sending or receiving a fax,
the fax image may be corrupted or a communication error may occur.
If the incoming call is a voice call, the telephone may ring late or stop halfway, and if the incoming call is a fax, the
machine may not be able to receive the fax.
If you connect a telephone with the fax function, disable the fax function (disable fax reception) before using.
1040