Using the Operator Panel
Enabling Auto Power Off
Setting the Transition Time
Enabling Auto Power Off
1.
Press
(SETTING).
2.
Press
to select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
Entering Characters
4.
Select [Enter], and then press
5.
Press
to select [User Install], and then press
6.
Press
to select [Power Setup], and then press
7.
Press
to select [Auto Power Off], and then press
8.
Press
to select [Enable], and then press
9.
Press
until the top screen is displayed.
Setting the Transition Time
1.
Press
(SETTING).
2.
Press
to select [Admin Setup], and then press
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Select [Enter], and then press
5.
Press
to select [Management], and then press
6.
Press
to select [Power Save], and then press
7.
Press
to select [Auto Power Off Time], and then press
8.
Press
to select the transition time, and then press
Available transition time settings
1 hour,
2 hours,
* indicates the factory default setting.
9.
Press
until the top screen is displayed.
(OK).
(OK).
3 hours,
4 hours*,
8 hours,
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
(OK).
12 hours,
18 hours,
24 hours
458