Table of Contents
Advertisement
Settings for Transmission
This section describes how to send a fax.
• Scanning Multiple Documents Continuously on the Document Glass (Continuous Scan
(Glass))
• Scanning Multiple Documents Continuously with the ADF (Continuous Scan (ADF))
• Sending at a Specified Date and Time (Delayed Tx)
• Sending While a Document is being Scanned (Memory Transmission/Real time
Transmission)
• Sending a Fax after Calling (Manual Transmission)
• Manual Sending (On-hook dial)
• Preventing Wrong Fax Transmissions
Scanning Multiple Documents Continuously on the Document
Glass (Continuous Scan (Glass))
For continuous scanning, the settings related to the image settings, such as resolution, density, and scan size, cannot
be changed.
1
Press the
(FAX) button on the operator panel.
2
Set a document on the document glass.
3
Check that [Fax] is selected, and then press the
4
Press the
button to select [Fax Functions] and press the
5
Press the
or
button to select [Continuous Scan(Document Glass)] and
press the
button.
6
Press the
or
button to select [ON] and press the
7
Press the
button.
8
Specify a destination.
Entering Fax Number to Send a Fax (User's Manual)
Specifying a Destination from Phone Book
Specifying a Destination Using One-touch Button
Specifying a Destination from Transmission History and Reception History
9
Press the
(MONO) button to start scanning the first document.
10
When [Please set next document] is displayed, set the next document.
11
Check that [Start Scan] is selected, and then press the
12
Repeat steps 10 and 11 for each fax transmission document if necessary.
13
When scanning all sets of the documents is complete, press the
button to select [Scan Complete] and press the
- 156 -
5. Fax
button.
button.
(OK) button.
(OK) button.
or
(OK) button.
Advertisement
Table of Contents
