Scanning Multiple Documents Continuously (Continuous Scan) - Oki MB472dn User Manual

Scanning Multiple Documents Continuously (Continuous Scan)

To scan multiple documents as a single job, enable Continuous Scan mode.
In Continuous Scan mode, you can scan your documents from the ADF, document glass, or both of them.
1.
Press (SCAN).
2.
Set the first sheet of a document in the ADF or on the document glass.
3.
Select a scan type from [Scan Menu], and then press
4.
Press to select [Scan Setting], and then press
5.
Press to select [Continuous Scan], and then press
6.
Press to select [ON], and then press
7.
Press or
Scanning the first sheet of a document starts.
8.
When the [Please set next document] screen is displayed, set the next document.
Note
If you set the next document to a different place, remove the document from the place you used first.
9.
Check that [Start Scan] is selected, and then press
Scanning starts.
10.
When all sets of the documents are scanned, press
(OK).
.
(OK).
(OK).
(OK).
(OK).
(OK).
to select [Scan Complete], and then press
106