Cleaning The Fixing Assembly - Canon imageCLASS MF273dw User Manual

Cleaning the Fixing Assembly

If the printout is smudged, the fixing assembly may be dirty. In this case, you can clean the fixing assembly using
paper.
The fixing assembly cannot be cleaned when data is waiting to be printed or a toner cartridge has reached the end of
its lifetime.
Required Preparations
● Check that there is enough amount of toner remaining in the toner cartridge.
Amount of Consumables(P. 477)
Touch Panel Model(P. 468)
5 Lines LCD Model(P. 468)
Touch Panel Model
1
On the operation panel, press [Menu] in the [Home] screen.
2
Press [Adjustment/Maintenance]
➠
The available paper sizes and types are displayed on the confirmation screen.
3
Check that available paper is loaded, and then press [Start].
➠
The paper is fed to the machine, and cleaning starts.
When cleaning is completed, a sheet of paper with a printed image (pattern) is output.
5 Lines LCD Model
1
On the operation panel, select [Menu] in the [Home] screen, and press
Screen(P. 113)
2
Press [Adjustment/Maintenance]
Assembly]
➠
The available paper sizes and types are displayed on the confirmation screen.
3
Check that available paper is loaded, and then press
➠
The paper is fed to the machine, and cleaning starts.
When cleaning is completed, a sheet of paper with a printed image (pattern) is output.
Maintenance
.
[Maintenance] [Clean Fixing Assembly].
[Maintenance]
468
Checking the Remaining
[Home] Screen(P. 113)
.
[Clean Fixing
.
94LS-0CJ
[Home]