Removing The Fixing/Power Supply Cooling Fan; Preparation; Procedure - Canon Color imageRUNNER LBP5280 Service Manual

3
Disassembly/Assembly > Controller System > Removing the Fixing/Power Supply Cooling Fan > Procedure

Removing the Fixing/Power Supply Cooling Fan

■ Preparation

1) Remove the Right Cover.(Refer to page 3-16)

■ Procedure

1) Free the harness [1] from the guide [A].
[1]
CAUTION:
Be sure to place the Harness Band [2] of the harness [1] on the left side of the guide [3]
at installation.
[1]
3 Disassembly/Assembly > Controller System > Removing the Fixing/Power Supply Cooling Fan > Procedure
[A]
F-3-108
[2]
[3]
F-3-109
2) Pass the harness [1] through the groove [A] of the Right Frame Cover, and remove the
Fixing/Power Supply Cooling Fan [2].
• 1 Connector [3]
• Harness Guide [B]
• 3 Claws [4]
[3]
x3
[B] [4]
CAUTION:
Be sure to check the following when installing.
• Connect the Fan Cable [1] to the guide [C] of the fan.
• The label [2] of the fan should face the host machine.
[1]
[C]
3-52
[A]
[1]
[2]
F-3-110
[2]
F-3-111
3-52