Feeding Faults; Double Feeding - Canon imageCLASS D600s Service Manual

Stack of originals
Original
Roller (ADF)
Gear, Belt (drive assembly)
5.4

Feeding Faults

5.4.1

Double Feeding

Paper
Stack of paper
Paper
Paper
COPYRIGHT © 2001 CANON INC.
Chapter7C.p65
4) Is the stack of originals in the original placement assembly more
than allowed?
YES: Advise the user on the number of originals that may be paled in the
original placement assembly.
5) Is the original curled or do originals bond together because of static
charge?
YES: Advise the user that the cause is the originals. Remove the curl,
and fan out the originals.
6) Is the surface of the following roller of the ADF normal?
• original pickup roller
• ADF registration roller
• white roller
• original feeding roller
• original delivery roller
NO: Clean any soiled roller. If scratched, replace it.
7) Is any of the gears or the belts in the drive assembly cracked or
damaged?
YES: Replace the damaged gear/belt.
1) Is the paper placed correctly?
NO: Place the paper correctly.
2) Is the amount of paper in the cassette/manual feed tray more than
allowed?
YES: Advise the user on the amount of paper that may be placed.
3) Is the paper curled or wavy?
YES: Replace the paper, and advise the user on the correct method of
storing paper.
4) Try paper of a recommended type. Is the problem corrected?
YES: Advise the user to use recommended paper.
CANON imageCLASS D600s/PC1060s/PC1200s/iR1200s REV. 0 SEPT. 2001
85
CHAPTER 7 TROUBLESHOOTING
8/26/01, 3:49 PM
7-85