Setting Netware Parameters - Avery Dennison Monarch 9493 SNP Administrator's Manual

S e t t i n g N e t w a r e P a r a m e t e r s
You can enable Netware, set frame types, and passwords.
From the side menu, click NetWare.
1.
2. Click the name of the enabled service to modify the NetWare parameters
for that service. See "Configuring Print Services" for more information.
You can also change the network frame type (packet format),
NetWare password, or disable NetWare.
3. When you are finished, click Submit.
4. Click the reset link at the bottom of the screen. The Reset Server screen
appears.
Click Submit and wait five seconds for the print server to reset.
5.
Even though you submitted your changes, they do not take effect until
you reset the print server.
You must re-enter your access password to make any further changes to
the printer settings.
4-6 System Administrator's Guide