Avery Dennison Monarch 9493 SNP Administrator's Manual page 59

2. Click Email Alerts to setup the mail server and select users to receive
messages about the printer's status.
Enter your SMTP server, email address, server port, and the trigger
3.
conditions for an email alert. You can enter up to eight email addresses.
Note: The S1 port acts as a toggle switch to enable or disable the alerts.
You must select S1 to enable the alerts.
Click Submit.
4.
Click the reset link at the bottom of the screen. The Reset Server screen
5.
appears.
6. Click Submit and wait five seconds for the print server to reset.
Even though you submitted your changes, they do not take effect until
you reset the print server.
You must re-enter your access password to make any further changes to
the printer settings.
Using a Web Browser 4-11