Avery Dennison Monarch 9493 SNP Administrator's Manual page 33

Setting the Gateway
This option sets the printer's router (gateway) address.
From the Configure menu, select Gateway.
1.
Press D or U to increase or decrease the highlighted number. Press L
2.
or R to highlight a different number.
3. When you are finished, press R until you see e. Press e to save the
address and return to the Configure menu. Press X to exit without
saving changes.
Setting the Power Mode
This option sets the power mode to CAM (Continuous Awake Mode) or PSP
(Power Save Protocol). PSP conserves battery power. CAM means the
printer is continuously receiving and transmitting data. This mode uses
battery power quickly.
1. From the Configure menu, select Power Mode.
A checkmark indicates the current option.
2. Press U or D until you see the power mode you need. Press e to
enable it.
Note: If you select PSP, you are prompted to enter a PSP algorithm
between 1-5. 1 - shortest sleep time (uses battery power quicker,
but responds faster); 5 - longest sleep time (optimal battery
conservation, but responds slower).
3. Press U or D to select the PSP algorithm you need. Press e to save
the setting and return to the Configure menu. Press X to exit without
saving changes.
Configuring the 802.11b/g and IP Settings 2-21