Checking The Status; Configuring The Printer - Avery Dennison Monarch 9493 SNP Administrator's Manual

Checking the Status

This option displays the status of the network.
From the Network menu, select Status.
1.
You see the printer model, firmware version, and bootloader version.
2. Press E to move through the next four screens of information.
You see the radio type and MAC address, local IP address, SSID,
protocol, network mode, status, and connection speed.
3. Press E again to return to the Network menu.

Configuring the Printer

The Configure menu allows you to set the printer's IP address, subnet mask,
gateway, power mode, protocol, SSID, encryption type, keys, and escape
character. You can also enable or disable Ad-Hoc mode.
From the Network menu, select Configure.
To exit, press E until you return to the Pause screen.
Configuring the 802.11b/g and IP Settings 2-19