Troubleshooting Network Configuration; Technical Support - Avery Dennison Monarch 9493 SNP Administrator's Manual

T r o u b l e s h o o t i n g N e t w o r k C o n f i g u r a t i o n
♦ To use TCP/IP, your computer and the print server should be on the same
IP segment or can reach each other with a PING command from the host.
The IP address you assign to the print server must be on the same logical
network as your host computers.
♦ If your print server is set to Auto or DHCP for obtaining an IP address,
the print server's IP address can change. Either configure your DHCP
server to give the print server a permanent lease or configure the print
server to be on a static address that does not conflict with any other
address.
T e c h n i c a l S u p p o r t
If these solutions do not work, call Service at the number listed on the back
of this manual.
7-4 System Administrator's Guide