Ibm Aix Configuration; Configuration On Other Systems - Avery Dennison Monarch 9493 SNP Administrator's Manual

I B M A I X C o n f i g u r a t i o n
To configure a print server on IBM AIX 4.x, use the SMIT program as follows:
Enter SMIT and select Devices.
1.
Select Printer/plotter.
2.
Select Manage remote printer subsystem.
3.
Select Client services.
4.
Select Remote printer queues.
5.
6. Select Add a remote queue. Enter the following remote queue settings:
♦ Name of queue to add (user selectable) Activate the queue (Yes).
♦ Destination host (print server's IP address; or if you have configured
the /etc/hosts file, use the name of the print server that you specified
in that file).
♦ Name of queue on remote printer BINARY_P1 for binary files or
TEXT_P1 for text files).
♦ Name of device to add (user selectable; for example lp0).
7. You should now be able to print using the normal lp -d command.
Note: The configuration for earlier versions of AIX is slightly different.
The print server can also be configured as a JetDirect card using
AIX. To do this, refer to your AIX documentation.
C o n f i g u r a t i o n o n O t h e r S y s t e m s
The print server can be used with any computer system that supports the
LPR/LPD protocol or HP JetDirect (port 9100 is the default; however, it can
be reconfigured). Refer to the system's documentation to configure
LPR/LPD or JetDirect print queues.
Selecting a Management Method 3-7