Tcp/Ip Commands - Avery Dennison Monarch 9493 SNP Administrator's Manual

SEt NW SPeed <1/2/5.5/6/9/11/12/18/24/36/48/54>
Sets 802.11b/g wireless speed in megabits per second (Mpbs).
SEt NW SSid "<ssid>"
Sets 802.11b/g wireless SSID. Use quotes if there is a space in SSID. This is
case sensitive.
SH NW STATS
Shows the network I/O statistics.
SEt NW WEP [DIS/64/128]
Sets wired equivalent privacy encryption level to disabled, 64-bit, or 128-bit.
SEt NW WPAGROUP [ENABLE/DISABLE]
Selects whether to use the WPA group key mode. When enabled, group keys are
used for data link encryption.
SEt NW WPAPSK <psk-str>
Sets the WPA pre-shared key or pass-phrase. Use 64 hex characters for the PSK
or 8-63 characters for the pass-phrase. This is only valid when authentication
mode is WPA-PSK.
T C P / I P C o m m a n d s
SEt IP [EN/DIS]
Selects whether to use IP-based protocols.
SEt IP ACcess [EN] aa.bb.cc.dd
[Mask ee.ff.gg.hh]
Allows or prevents specified IP address from accessing print server.
SEt IP ADdress
Sets IP address of print server.
SEt IP ARP [EN/DIS]
Selects whether to use an IP address with an ARP packet.
SEt IP BAnner [EN/DIS]
Sets printing of LPD job banners.
SEt IP BOot n
Sets number of retries (n) for DHCP, BOOTP, RARP
6-14 System Administrator's Guide