Configuring Print Services - Avery Dennison Monarch 9493 SNP Administrator's Manual

C o n f i g u r i n g P r i n t S e r v i c e s
You can configure the service ports if necessary.
From the side menu, click Print Services. The Configure Service screen
1.
appears.
Click the name of the service you want to modify from the available
2.
services listed.
The Configure Service page allows you to specify ports, determine
network protocols, set filters and more.
3. Enter the new attributes and click Submit.
4. Click the reset link at the bottom of the screen. The Reset Server screen
appears.
Click Submit and wait five seconds for the print server to reset.
5.
Even though you submitted your changes, they do not take effect until
you reset the print server.
You must re-enter your access password to make any further changes to
the printer settings.
Using a Web Browser 4-5