Checking The Status - Avery Dennison Monarch 9493 SNP Administrator's Manual

Press D until Setup is highlighted.
6.
Setup
Service
E U
Press E to select Setup.
7.
From the Setup menu, press D until you see RF Network. Press E to
8.
select RF Network.
The RF Network menu allows you to check the printer's status, configure the
RF network settings, print RF settings, and reset the radio.
To exit, press F at any time.

Checking the Status

This option displays the status of the RF network.
1. From the RF Network menu, select Status.
192.0.0.192
1.0
(2006.11.20)
PXR1E858F
The local IP address, firmware version, printer model, board revision,
and device name are displayed.
Press A to see the next screen of information.
2.
0040171E858F
Protocol: TCP
State: Wait
Radio: IEEE 802.11g
The MAC address, protocol, current state, and radio type are
displayed.
Press any A to return to the RF Network menu.
3.
2-8 System Administrator's Guide
D