Avalanche Console Commands - Avery Dennison Monarch 9493 SNP Administrator's Manual

SHow SERVEr COunters
Shows the server statistics.
SHow SERVEr QUeue
Shows the print server internal queue.
SHow SERVEr SYSLog
Shows the system log, if access is enabled.
SHow TEstpage
Prints a test page.
SHow VErsion
Shows the server firmware version.
UNPROTect
Allows the user to enter the update password (if one has been defined). Once the
update password is entered correctly, SET commands can be used to modify the
configuration until the console session is closed with EXIT.
ZEro
Zeros statistical counts.
A v a l a n c h e C o n s o l e C o m m a n d s
DELete AVAlanche PROPerty <name>
Removes an Avalanche property.
Note: This allows the user to delete system-defined properties. However,
they are recreated on a restart.
SEt AVAlanche IP <ip address>
Sets the address of the Avalanche Agent.
SEt AVAlanche <EN/DIS>
Enables or disables the Avalanche Enabler.
SEt AVAlanche PROPerty <name> <property value>
Adds an Avalanche property.
Telnet Console Commands 6-9