Setting Up The 9493™ Printer - Avery Dennison Monarch 9493 SNP Administrator's Manual

S e t t i n g U p t h e 9 4 9 3 ™ P r i n t e r
Use these instructions to set up a 9493 printer using the printer's Network
Setup menu.
Turn on the printer by pressing p.
1.
The display flashes printer version information and battery charging
status. Then you may see
The J indicates the wireless signal strength.
Note: When using wired Ethernet, connect the network cable before you
turn on the printer. The print server cannot detect the connection if
the printer is already on.
2-16 System Administrator's Guide