Avery Dennison Monarch 9493 SNP Administrator's Manual page 102

Hide thumbs Also See for Monarch 9493 SNP:
Table of Contents

Advertisement

SEt IP SUbnet aa.bb.cc.dd
Sets default subnet mask.
SEt IP TCP [EN/DIS]
Selects whether to use the raw TCP (port 9100) protocol.
SEt IP TELNET [EN/DIS]
Selects whether to use the Telnet protocol.
SEt IP TFTP [EN/DIS]
Selects whether to use the TFTP protocol.
SEt IP TImeout n
Sets timeout (n) in minutes.
SEt IP TRAP n ADDR <a.b.c.d[:e]>
Sets the destination IP address and optional port number to specify where to send
the trap (n). If the port is not specified, it defaults to 162.
SEt IP TRAP n POrt n
Specifies the port that will be scanned for trigger conditions. The parameter is a bit
mask.
SEt IP TRAP n TRIGger cccc
Specifies the trigger conditions (cccc) that send a trap (n). The parameter is a
bit mask.
1
On line
2
Off line
4
(not used)
10
Paper out
20
Paper jam
8000 Printer error
SEt IP WIndow nn
Sets the LPD/TCP maximum window size (nn).
6-16 System Administrator's Guide

Advertisement

Table of Contents
loading

Table of Contents