Printing Info; Resetting The Radio - Avery Dennison Monarch 9493 SNP Administrator's Manual

P r i n t i n g I n f o
Do not use supply smaller than 2012 or
information may print off the label.
1. From the RF Network (9460) or Network
(9493) menu, select Print Info.
Three wireless network information
labels print.
The first label contains radio version
information. The second label contains
the RF (wireless) settings, including the
SSID, security, and signal strength.
The third label contains TCP/IP settings,
including the IP address, boot method,
etc.
Press the navigation button to return to
2.
the RF Network or Network menu.

Resetting the Radio

After you save the configuration, you must
reset the radio before the changes
take effect. When you select "Reset," the
radio reinitializes.
Note: You may lose your current connection
and application. Resetting the network
may take up to one minute before you
can access the wireless print server
(radio).
1. From the RF Network or Network menu,
select Reset. You may see:
For the 9460, press any navigation button to return to the RF Network.
2.
The 9493 returns to the Network menu automatically.
Mona rch Prin t Se rv er Status
MAC:
Prin ter Mo de l:
Boot Ver :
Application:Peg3-1.20 (2008.06 .10)
Wireless In fo rmation
SSID:
Mode :
S pee d :
Secu rity :
Sig. Streng th :
Actual SSID:
Assoc. AP MAC: 00-a0 -f8-aa-83 -25
T CP /IP
IP Address:
Subnet Ma sk :
R ou ter :
(set manually)
Boo t Me tho d:
Boot Retrie s:
Timeout:
Keep aliv e:
Configuring the 802.11b/g and IP Settings 2-27
00-a0 -f8-5f-72-0b
9 493 SNP
1.0
Label 1
MON 123
INFRAST RUCTURE
5 4 mb ps
Disabled
5 1
MON 123
Label 2
192.0.0.192
255.255.25 5.0
192 .0.1 92 .0
STAT IC
4
0 min
1 min
Label 3