Avery Dennison Monarch 9493 SNP Administrator's Manual page 94

SEt DEFAULT
Sets print server to factory defaults.
SEt LOAd [EN/DIS]
Enables or disables firmware reload after exit.
SEt LOAd HOst <name>
Sets node name of boot host (NetWare firmware load).
SEt LOAd IP aa.bb.cc.dd
Sets IP address of load host (TCP/IP firmware load).
SEt LOAd SOftware <filename>
Sets print server's firmware filename to load.
SEt PAssword
Sets console password. The default password is access.
Note: The password is case-sensitive.
SEt PROtect <password>
Sets the update password.
SEt SERVEr DEScription
Sets mode description to string displayed with SHOW SERVER command.
SEt SERVEr NAme <name>
Sets server node name.
SEt SERVEr SYSLog [EN/DIS]
Enables or disables access to the system log.
SHow FATal
Shows the fatal error log.
SHow FREE
Shows the amount of available memory.
SHow LOAd
Shows the print server's firmware update parameters.
SHow SERVEr
Shows the server parameters.
6-8 System Administrator's Guide