To Remove Hosts; Configuring Network Security - Avery Dennison Monarch 9493 SNP Administrator's Manual

To Remove Hosts

You can remove a range of remote IP addresses.
Select a range from the drop-down menu.
1.
Click Remove.
2.
Click the reset link at the bottom of the screen. The Reset Server screen
3.
appears.
4. Click Submit and wait five seconds for the print server to reset.
Even though you submitted your changes, they do not take effect until
you reset the print server.
You must re-enter your access password to make any further changes to
the printer settings.
C o n f i g u r i n g N e t w o r k S e c u r i t y
You can enable or disable network security, assign WEP keys, set up a User
ID and password, select an authentication protocol, and more. See "Basic
Security Configurations" for more information.
From the side menu, click Admin. The Web Admin Configuration screen
1.
appears.
4-20 System Administrator's Guide