Avery Dennison Monarch 9493 SNP Administrator's Manual page 36

Setting the Encryption
This option allows you to set the printer's encryption method to None,
WEP 64, WEP 128, WPA, WPA2, or WPA2/WPA. The default is None (no
encryption).
From the Configure menu, select Encryption.
1.
A checkmark indicates the current setting.
Press D or U until you see the encryption you need, then press e to
2.
enable it and return to the Configure screen. Press X to exit without
saving changes.
Note: When you use encryption, you must set the keys to secure your
network. See "Setting the Encryption Keys" for more information.
Setting the Key Index
This option sets the key to use for the selected encryption method.
See "Basic Security Configurations" for more information on encryption keys.
1. From the Configure menu, select Keys.
2. Select Index.
You can select up to four 104-bit keys using keys 1-4, or up to two
128-bit keys using keys 1 and 3.
3. Select the key you need and press e to save the setting or press X to
exit without saving changes. You return to the Keys menu.
4. Enter the key values. See "Setting the Encryption Keys" for more
information.
2-24 System Administrator's Guide