Setting The Network Card Access Password - Avery Dennison Monarch 9493 SNP Administrator's Manual

Setting the Network Card Access Password

When set, the network card access password allows you to view the Web
browser and the remote console. The default is access. The password is
case-sensitive and stored in the printer's flash memory.
Note: Make a note of the password if you change it. Changing the
password also restricts access to Telnet sessions.
1. From the side menu, click Admin. The Web Admin Configuration screen
appears.
2. Click Configure Network Card Access Password.
3. Enter a new network access password.
4. Retype the new password to confirm it.
5. Click Submit.
4-16 System Administrator's Guide