Configuring Printranet - Avery Dennison Monarch 9493 SNP Administrator's Manual

C o n f i g u r i n g P r i n t r a N e t
You can enable POP3, set the Server Address, Mailbox Name, Password
and more.
1. From the side menu, click PrintraNet.
2. Enter the IP address of the POP3 or SMTP server on your network where
internet print jobs are located.
You may also specify a mailbox name and password. For no password
required, enter a single space in the field provided.
Click Submit.
3.
Click the reset link at the bottom of the screen. The Reset Server screen
4.
appears.
5. Click Submit and wait five seconds for the print server to reset.
Even though you submitted your changes, they do not take effect until
you reset the print server.
You must re-enter your access password to make any further changes to
the printer settings.
4-8 System Administrator's Guide