Avery Dennison Monarch 9493 SNP Administrator's Manual page 29

Display
Ready
M
J
N
n
m
Press A under P.
2.
You see the Pause screen with the battery indicator E (empty) and F
(full). As you use the printer, the battery indicator line gets closer to
E, instead of F. Recharge the battery when the line is by the E.
Indicates
The printer is in Ready mode to send and receive data.
The printer is connected to a network (peer-to-peer or
infrastructure mode). Press A under M to display the
printer's IP address. Press I then E to view network
information. Press
label with the device name, IP address, and MAC
address as a bar code. See "Printing a Network
Information Label" for more information.
Press E to return to Ready mode.
Shows the wireless signal strength between the printer
and the network.
The printer is not connected to a wireless network.
The printer is connected to a wired Ethernet 802.3
network. Press A under n to display the printer's IP
address. Press I then E to view network information.
Press to print a network information label with the
device name, IP address, and MAC address as a bar
code. See "Printing a Network Information Label" for
more information.
Press E to return to Ready mode.
The printer is not connected to a wired Ethernet
network.
to print a network information
Configuring the 802.11b/g and IP Settings 2-17