Table of Contents
Advertisement
2
I
NSTALLATION
2.2 U
NPACKING
Setting up
2.2.3
WARNING!
Risk of injury from a tipping over support
stand.
When installing the machine on a support
stand, make sure that it can not tip over.
Fix the support stand onto the ground.
Prerequisites:
Support stand with a tube end providing the following
measures:
– Outer diameter: 60 mm
– Wall thickness: minimum 5 mm
The machines offer three attachment points for mount-
ing to the support:
– Rear side
Requires a fixing bolt to be mounted on the rear side
of the machine. A joint [4B] is used to attach the
fixing bolt to the support. Advantage: The machine
can be inclined both side to side and forwards and
backwards.
– Side plate
Requires a flange [4A] to be mounted on the side
wall of the machine.
– Base plate
Requires a flange [4C] to be mounted on the base of
the machine casing.
,
ASSEMBLING AND CONNECTING THE MACHINE
A
[4] Attachment points
14
ALS
104
B
C
Advertisement
Table of Contents
