Setting Netware Parameters - Avery Dennison Monarch 9460 SNP System Administrator Manual

Enter the new attributes and click Submit.
3.
Click the reset link at the bottom of the screen. The Reset Server screen appears.
4.
Click Submit and wait five seconds for the print server to reset.
5.
Even though you submitted your changes, they do not take effect until you reset the
print server.
You must re-enter your access password to make any further changes to the printer
settings.
S e t t i n g N e t w a r e P a r a m e t e r s
You can enable Netware, set frame types, and passwords.
From the side menu, click NetWare.
1.
Click the name of the enabled service to modify the NetWare parameters for that
2.
service. See "Configuring Print Services" for more information.
You can also change the network frame type (packet format), NetWare password,
or disable NetWare.
When you are finished, click Submit.
3.
Click the reset link at the bottom of the screen. The Reset Server screen appears.
4.
Click Submit and wait five seconds for the print server to reset.
5.
Even though you submitted your changes, they do not take effect until you reset the
print server.
You must re-enter your access password to make any further changes to the printer
settings.
4-4 System Administrator's Guide