Setting The Speed - Avery Dennison Monarch 9419 Administrator's Manual

S e t t i n g t h e S p e e d
Select the print speed in IPS (inches per second). If print quality is important, reduce the
print speed - a lower print speed increases the print quality of labels. Use premium
supplies when printing at high speeds. The default setting is 5.
Select To
1.5 Print at 1.5 IPS
2 Print at 2.0 IPS.
3 Print at 3.0 IPS
4 Print at 4.0 IPS
5 Print at 5.0 IPS
6 Print at 6.0 IPS
7 Print at 7.0 IPS
8 Print at 8.0 IPS
Note: The maximum speed using a 300 dpi printhead is 6.0 ips.
The maximum speed using peel mode is 3.0 ips.
S e t t i n g t h e P r i n t C o n t r a s t
Having the correct print contrast/density setting is important because it affects bar code
scan ability and printhead life. It may require adjustments based on the supply. The
default is 8.
Solid black print cannot exceed 30% of any given square inch of the supply.
Select
Navigation
button:  or 
S e t t i n g t h e I m a g e R o t a t i o n
Select the printout direction. The default is 0.
Select To
0 The printout is the same direction as the
feed direction.
1 The printout is rotated 180 degrees from
the feed direction (text appears upside
down).
2-2 Offline Mode System Administrator's Guide
To
Increase or decrease the contrast to darken or lighten the print.