Configuring The Printer - Avery Dennison Monarch 9493 SNP Administrator's Manual

Configuring the Printer

The Configure menu allows you to set the printer's IP address, subnet mask,
gateway, power mode, protocol, SSID, and escape character.
To exit, press F at any time.
Setting the IP Address
This option sets the printer's IP address.
1. From the RF Network menu, select Configure.
2. From the Configure menu, select IP Address.
IP Address
192.0.0.192
E R
For:
BOOTP
DHCP
Static IP
Use the A buttons as shown in the following table:
E
Press A to
Saves the setting
When the setting you want is displayed, press E to save the setting.
3.
You return to the Configure menu.
+
Select:
0.0.0.0
0.0.0.1
nnn.nnn.nnn.nnn
R
Press A to
Scrolls through the
positions from left to right
+
Press A to
Increments the current
position setting by 1
Configuring the 802.11b/g and IP Settings 2-9